Валидация пакета программ «Логос» на задачах динамики и теплообмена в двухфазных средах

Валидация пакета программ «Логос» на задачах динамики и теплообмена в двухфазных средах с использованием односкоростной многофазной модели жидкости со свободной поверхностью

Козелков А. С., Пузан А. Ю., Лаптев И. В., Курулин В. В., Куроедов А. А., Городнов А. О.

УДК 532.5:519.6 
DOI: 10.33048/SIBJIM.2026.29.306


Аннотация:

Представлены результаты валидации российского пакета программ «Логос» на задачах динамики и теплообмена в двухфазных средах. Двухфазное течение моделируется на основе решения системы уравнений Навье — Стокса, межфазная граница учитывается посредством односкоростной многофазной модели жидкости VOF. Система уравнений решается методом Simple, реализованном на базе конечно-объёмной дискретизации для неструктурированных расчётных сеток. Базис валидационных задач разбит на два класса: задачи динамики границы раздела фаз и задачи сопряжённого тепломассообмена в двухфазных средах. Базис содержит девять задач, для которых доступны эталонные аналитические или экспериментальные данные по ключевым физическим параметрам задачи. Целью валидации программного пакета «Логос» было подтверждение его способности адекватно описывать динамику и теплообмен в двухфазных средах, а также обеспечение высокой точности результатов моделирования. В рамках исследования для различных классов задач были получены следующие осреднённые значения относительной погрешности: для задач исследования динамики границы раздела фаз усреднённая относительная погрешность лежит в диапазоне от 0,7% (амплитуда уровня воды в задаче о колебании воды в резервуаре под действием силы тяжести), до 25% (амплитуда уровня воды в задаче о плескании жидкости в качающейся ёмкости); для задач сопряжённого тепломассообмена в двухфазных средах погрешность в диапазоне от 0,14% (скорость распространения возмущений в задаче о распространении малых возмущений в смеси), до 6% (положение границы раздела фаз в задаче о движении межфазной границы за счёт испарения). Исследования показали, что пакет программ «Логос» позволяет корректно воспроизводить основные физические явления и процессы, характерные для течений двухфазных сред в присутствии границы раздела с допустимой для данного класса задач погрешностью.

Литература:
  1. Wu M., Zhang J., Gui N. Advances in the modeling of multiphase flows and their application in nuclear engineering // A Review. Exp. Comput. Multiph. Flow. 2024. N 6. P. 287–352; DOI: 10.1007/s42757-024-0202-5 
     
  2. Апостол Ю. С., Вожаков И. С. Численное моделирование турбулентного газового потока над волнистой поверхностью // Сиб. журн. индустр. матем. 2023. V. 26, № 2. C. 5–13.
     
  3. Mani M., Dorgan J. A Perspective on the State of Aerospace Computational Fluid Dynamics Technology // Annual Rev. Fluid Mech. 2023. V. 55. P. 431–457; DOI: 10.1146/annurev-fluid-120720-124800
     
  4. Козелков А. С., Лашкин С. В., Куркин А. А., Корнев А. В., Вялых А. М. Параллельная реализация метода SIPMLE на основе многосеточного метода // Сиб. журн. вычисл. математики. 2020, Т. 23, № 1. С. 1–22.
     
  5. Козелков А. С., Таранов A. E., Курулин В. В., Рудниченко A. A., Плыгунова K. С., Крутякова O. Л. Валидация программного комплекса Логос с использованием задач в судостроении // Труды Крыловского государственного научного центра. 2023. Т.4, № 406. С. 59–73.
     
  6. Kozelkov A., Kurkin A., Kurulin V., Plygunova K., Krutyakova О. Validation of the LOGOS software package methods for the numerical simulation of cavitational flows // Fluids. 2023. V. 8, Iss. 3. P. 104; DOI: 10.3390/fluids8030104
     
  7. Hu G., Celik I. Eulerian Lagrangian based large eddy simulation of a partially aerated bubble column // Chemical Engrg. Sci. 2008. V. 63. P. 253–271.
     
  8. Linmin Li, Yabiao Niu, Guolai Wei, Sivakumar Manickam, Xun Sun, Zuchao Zhu Investigation of cavitation noise using Eulerian-Lagrangian multiscale modeling // Ultrasonics Sonochemistry. 2023. V. 97. Article number 106446.
     
  9. Alkhezzi A., Fan Y. Improved two-fluid model for segregated flow and integrated multiphase flow modeling for downhole pressure predictions // Energies. 2023. V. 16, Iss. 24; DOI: 10.3390/en16247923
     
  10. Zurner Till, Kamble Vikrant, Rzehak Roland, Eckert Kerstin Experimental and numerical investigation of turbulent multiphase jets // Minerals Engrg. 2024. V. 211.
     
  11. Mohan A., Tomar G. Volume of Fluid Method: A Brief Review // J. Indian Inst. Sci. 2024. V. 104. P. 229–248; DOI: 10.1007/s41745-024-00424
     
  12. Городнов A. O., Лаптевv И. В. Влияние теплоемкости стенки на рост давления и температурную стратификацию при термической конвекции паров водорода в вертикальном цилиндрическом резервуаре // Труды МАИ. 2021. № 116. С. 2.
     
  13. Тятюшкина E. С., Козелков A. С., Куркин A. A., Курулин В. В., Ефремов В. Р., Уткин Д. A. Оценка численной диффузии метода конечных объемов при моделировании поверхностных волн // Вычислительные технологии. 2019. Т.24. № 1. С. 106–119, DOI: 10.25743/ICT.2019.24.1.008.
     
  14. Liu H., Tang J., Sun L. An assessment and analysis of phase change models for the simulation of vapor bubble condensation // Internat. J. Heat Mass Transfer. 2020. V. 157; DOI: 10.1016/j.ijheatmasstransfer.2020.119924 
     
  15. Seric I., Afkhami S., Kondic L. Direct numerical simulation of variable surface tension flows using a Volume-of-Fluid method // J. Comput. Phys. 2018. V. 352, N 1. P. 615–636. 
     
  16. Menter F. R., Kuntz M., Langtry R. Ten years of industrial experience with the sst turbulence model // Turbulence, Heat and Mass Transfer. 2003, V. 4. P. 625–632.
     
  17. Ferziger J., Peric M. Computational Method for Fluid Dynamics. N. Y.: Springer-Verl., 2002.
     
  18. Singh S., Kashyap P. Finite volume method: an efficient tool for transport equation solutions // J. Propulsion Technology. 2023. V. 44, N 6; DOI: 10.52783/tjjpt.v44.i6.3938
     
  19. Kovenya V. M., Babintsev P. V. Application of splitting algorithms in the method of finite volumes for numerical solution of the Navier–Stokes equations // J. Appl. Indust. Math. 2018. V. 12. P. 479–491; DOI: 10.1134/S1990478918030080
     
  20. Efimov D., Polyakov A., Aleksandrov A. Discretization of homogeneous systems using Eulermethod with a state-dependent step // Automatica. 2019. V. 109. Article number 108546.
     
  21. Fletcher K. Computational Methods in Fluid Dynamics in Two Volumes. M: Mir, 1991.
     
  22. Waclawczyk T., Koronowicz T. Comparison of cicsam and hric high-resolution schemes for interface capturing // J. Theor. Appl. Mech. 2008. V. 46, N 2. P. 325–345.
     
  23. Kim G., Rhee H., Jeon W. Lateral sloshing analysis by cfd and experiment for a spherical tank // Internat. J. Aeronaut. Space Sci. 2020. V. 21. P. 816–825; DOI: 10.1007/s42405-020-00295-2
     
  24. Ubbink O. Numerical prediction of two fluid systems with sharp interfaces // Department of Mechanical Engrg. Imperial College of Science: Technology & Medicine. 1997.
     
  25. Akyildiz H., Unal N. Sloshing in a three-dimensional rectangular tank numerical simulation and experimental validation // Ocean Engrg. 2010. V. 33, N 16. P.2135–2149.
     
  26. Zhang J., Wang Y. Liu. Numerical simulation of two-phase fluid dynamics in a spacecraft propellant tank under low-gravity conditions // Acta Astronautica. 2021. N 187. P. 45–58.
     
  27. Welch S. and Wilson J. A volume of fluid based method for fluid flows with phase change // J. Comp. Phys. 2000. V. 160. P. 662–682.
     
  28. Пузан А. Ю., Козелков А. С. Численная оценка погрешности моделирования испарения с использованием односкоростной многофазной модели жидкости со свободной поверхностью методом конечных объёмов // Вопросы атомной науки и техники. 2026. С. 53–67.
     
  29. Kozelkov A. S., Puzan А. Y. Estimation of the numerical diffusion of the finite volume method in condensation modeling using a single-rate multiphase model of a liquid with a free surface // Engrg. Phys. 2024. N 11. P. 41–55, DOI: 10.25791/infizik.11.2024.1439.
     
  30. Kamei S.,Hirata M. Study on condensation of a single vapor bubble into subcooled water-Part 2, experimental analysis // Heat Trans. Jpn. Res., 1990.
     
  31. Samkhaniani N., Ansar M. Numerical simulation of bubble condensation using CF-VOF // Progress in Nuclear Energy. 2016. V. 89. P. 120–131.
     
  32. Zeng Q., Cai J., Yin H. Numerical simulation of single bubble condensation in subcooled flow using OpenFOAM // Progress Nucl. Energy. 2015. V. 83. P. 336–346.
     
  33. Elperin T., Fominykh A. Heat transfer during gas hydrate formation in gas-liquid slug flow // Heat and Mass Transfer. 1996. V. 31, P. 179–183; DOI: 10.1007/BF02333317

Результаты получены при финансовой поддержке национального проекта «Наука и университеты» в рамках программы Минобрнауки РФ по созданию молодёжных лабораторий (проект FSWE-2024-0001). Других источников финансирования проведения или руководства данным конкретным исследованием не было.


А. С. Козелков
  1. Российский федеральный ядерный центр — Всероссийский научно-исследовательский институт экспериментальной физики, 
    г. Саров 607188, Россия
  2. Нижегородский государственный технический университет им. Р. Е. Алексеева, 
    г. Нижний Новгород 603155, Россия

E-mail: askozelkov@mail.ru 

А. Ю. Пузан
  1. Российский федеральный ядерный центр — Всероссийский научно-исследовательский институт экспериментальной физики, 
    г. Саров 607188, Россия
  2. Саровский филиал МГУ им. М. В. Ломоносова, 
    г. Саров 607328, Россия

E-mail: pppan@yandex.ru 

И. В. Лаптев
  1. АО Государственный научный центр «Центр Келдыша», 
    г. Москва 125438, Россия

E-mail: laptev.iv.kerc@gmail.com 

В. В. Курулин
  1. Российский федеральный ядерный центр — Всероссийский научно-исследовательский институт экспериментальной физики, 
    г. Саров 607188, Россия
  2. Нижегородский государственный технический университет им. Р. Е. Алексеева, 
    г. Нижний Новгород 603155, Россия
А. А. Куроедов
  1. АО Государственный научный центр «Центр Келдыша», 
    г. Москва 125438, Россия
А. О. Городнов
  1. АО Государственный научный центр «Центр Келдыша», 
    г. Москва 125438, Россия

Статья поступила 14.01.2026 г. 
После доработки — 26.05.2026 г.
Принята к публикации 15.07.2026 г.

Abstract:

The article presents the results of validation of the Russian Logos software package on the problems of dynamics and heat exchange in two-phase environments. Two-phase flow is modeled on the basis of the solution of the Navier-Stokes equation system, the interphase boundary is taken into account by means of a single-speed multiphase VOF fluid model. The system of equations is solved by the Simple method, implemented on the basis of finitevolume sampling for unstructured design grids. The basis of validation problems is divided into two classes: phase boundary dynamics problems and conjugate heat and mass exchange problems in two-phase media. The basis contains nine problems for which reference analytical or experimental data on key physical parameters of the problem are available. The purpose of the Logos validation was to confirm its ability to adequately describe the dynamics and heat transfer in two-phase environments, as well as to ensure high accuracy of the simulation results. As part of the study, the following averaged values ? ? of relative error were obtained for various classes of tasks: for tasks of studying the dynamics of the phase boundary, the averaged relative error lies in the range from 0.7(the amplitude of the water level in the problem of water fluctuation in the tank under the influence of gravity), up to 25(the amplitude of the water level in the problem of splashing liquid in a swinging tank); for problems of conjugate heat and mass exchange in two-phase media, an error in the range from 0.14(the rate of propagation of perturbations in the problem of propagation of small perturbations in the mixture), up to 6(the position of the phase boundary in the problem of the movement of the interphase boundary due to evaporation). Studies have shown that the Logos software package makes it possible to correctly reproduce the main physical phenomena and processes characteristic of currents of two-phase media in the presence of an interface with an error permissible for this class of tasks.

References:
  1. Wu M., Zhang J., Gui N. Advances in the modeling of multiphase flows and their application in nuclear engineering. A Review. Exp. Comput. Multiph. Flow, 2024, No. 6, pp. 287–352; DOI: 10.1007/s42757-024-0202-5
     
  2. Apostol Yu. S., Vozhakov I. S. Numerical modeling of turbulent gas flow over a wavy surface. J. Appl. Indust. Math., 2023, Vol. 17, No. 2, pp. 235–241.
     
  3. Mani M., Dorgan J. A Perspective on the State of Aerospace Computational Fluid Dynamics Technology. Annual Rev. Fluid Mech., 2023, Vol. 55, pp. 431–457; DOI: 10.1146/annurev-fluid-120720-124800
     
  4. Kozelkov A. S., Lashkin S. V., Kurkin A. A., Kornev A. V., Vyalyh A. M. Parallel’naya realizaciya metoda SIPMLE na osnove mnogosetochnogo metoda [Parallel implementation of the SIPMLE method based on the multigrid method]. Sib. Zhurn. Vychisl. Mat. [Sib. J. Comput. Math.], 2020, Vol. 23, No. 1, pp. 1–22 (in Russian).
     
  5. Kozelkov A. S., Taranov A. E., Kurulin V. V., Rudnichenko A. A., Plygunova K. S., Krutyakova O. L. Validaciya programmnogo kompleksa Logos s ispol’zovaniem zadach v sudostroenii [Validation of Logos software package using tasks in shipbuilding]. Trudy Krylovskogo gosudarstvennogo nauchnogo centra [Transactions of the Krylov State Research Centre], 2023, Vol. 4, No. 406, pp. 59–73 (in Russian).
     
  6. Kozelkov A., Kurkin A., Kurulin V., Plygunova K., Krutyakova О. Validation of the LOGOS software package methods for the numerical simulation of cavitational flows. Fluids, 2023, Vol. 8, Iss. 3, pp. 104; DOI: 10.3390/fluids8030104
     
  7. Hu G., Celik I. Eulerian Lagrangian based large eddy simulation of a partially aerated bubble column. Chemical Engrg. Sci., 2008, Vol. 63, pp. 253–271.
     
  8. Linmin Li, Yabiao Niu, Guolai Wei, Sivakumar Manickam, Xun Sun, Zuchao Zhu Investigation of cavitation noise using Eulerian-Lagrangian multiscale modeling. Ultrasonics Sonochemistry, 2023, Vol. 97. Article number 106446.
     
  9. Alkhezzi A., Fan Y. Improved two-fluid model for segregated flow and integrated multiphase flow modeling for downhole pressure predictions. Energies, 2023, Vol. 16, Iss. 24; DOI: 10.3390/en16247923
     
  10. Zurner Till, Kamble Vikrant, Rzehak Roland, Eckert Kerstin Experimental and numerical investigation of turbulent multiphase jets. Minerals Engrg., 2024, Vol. 211.
     
  11. Mohan A., Tomar G. Volume of Fluid Method: A Brief Review. J. Indian Inst. Sci., 2024, Vol. 104, pp. 229–248; DOI: 10.1007/s41745-024-00424
     
  12. Gorodnov A. O., Laptev I. V. Vliyanie teploemkosti stenki na rost davleniya i temperaturnuyu stratifikaciyu pri termicheskoj konvekcii parov vodoroda v vertikal’nom cilindricheskom rezervuare [Influence of wall heat capacity on pressure growth and temperature stratification during thermal convection of hydrogen vapors in a vertical cylindrical tank]. Trudy MAI [Proceed. MAI], 2021, No. 116, pp. 2 (in Russian).
     
  13. Tyatyushkina E. S., Kozelkov A. S., Kurkin A. A., Kurulin V. V., Efremov V. R., Utkin D. A. Ocenka chislennoj diffuzii metoda konechnyh ob’emov pri modelirovanii poverhnostnyh voln [Evaluation of numerical diffusion of the finite volume method when modelling surface waves]. Vychisl. Tehnol. [Comput. Technol.], 2019, Vol. 24, No. 1, pp. 106–119 (in Russian); DOI: 0.25743/ICT.2019.24.1.008
     
  14. Liu H., Tang J., Sun L. An assessment and analysis of phase change models for the simulation of vapor bubble condensation. Internat. J. Heat Mass Transfer, 2020, Vol. 157; DOI: 10.1016/j.ijheatmasstransfer.2020.119924
     
  15. Seric I., Afkhami S., Kondic L. Direct numerical simulation of variable surface tension flows using a Volume-of-Fluid method. J. Comput. Phys., 2018, Vol. 352, No. 1, pp. 615–636.
     
  16. Menter F. R., Kuntz M., Langtry R. Ten years of industrial experience with the sst turbulence model. Turbulence, Heat and Mass Transfer, 2003, Vol. 4, pp. 625–632.
     
  17. Ferziger J., Peric M. Computational Method for Fluid Dynamics. N. Y.: Springer-Verl., 2002.
     
  18. Singh S., Kashyap P. Finite volume method: an efficient tool for transport equation solutions. J. Propulsion Technology, 2023, Vol. 44, No. 6; DOI: 10.52783/tjjpt.v44.i6.3938
     
  19. Kovenya V. M., Babintsev P. V. Application of splitting algorithms in the method of finite volumes for numerical solution of the Navier–Stokes equations. J. Appl. Indust. Math., 2018, Vol. 12, pp. 479–491; DOI: 10.1134/S1990478918030080
     
  20. Efimov D., Polyakov A., Aleksandrov A. Discretization of homogeneous systems using Eulermethod with a state-dependent step. Automatica, 2019, Vol. 109. Article number 108546.
     
  21. Fletcher K. Computational Methods in Fluid Dynamics in Two Volumes. M: Mir, 1991.
     
  22. Waclawczyk T., Koronowicz T. Comparison of cicsam and hric high-resolution schemes for interface capturing. J. Theor. Appl. Mech., 2008, Vol. 46, No. 2, pp. 325–345.
     
  23. Kim G., Rhee H., Jeon W. Lateral sloshing analysis by cfd and experiment for a spherical tank. Internat. J. Aeronaut. Space Sci., 2020, Vol. 21, pp. 816–825; DOI: 10.1007/s42405-020-00295-2
     
  24. Ubbink O. Numerical prediction of two fluid systems with sharp interfaces. Department of Mechanical Engrg. Imperial College of Science: Technology & Medicine, 1997.
     
  25. Akyildiz H., Unal N. Sloshing in a three-dimensional rectangular tank numerical simulation and experimental validation. Ocean Engrg., 2010, Vol. 33, No. 16, pp.2135–2149.
     
  26. Zhang J., Wang Y. Liu. Numerical simulation of two-phase fluid dynamics in a spacecraft propellant tank under low-gravity conditions. Acta Astronautica, 2021, No. 187, pp. 45–58.
     
  27. Welch S. and Wilson J. A volume of fluid based method for fluid flows with phase change. J. Comp. Phys., 2000, Vol. 160, pp. 662–682.
     
  28. Puzan A. Yu., Kozelkov A. S. Chislennaya ocenka pogreshnosti modelirovaniya ispareniya s ispol’zovaniem odnoskorostnoj mnogofaznoj modeli zhidkosti so svobodnoj poverhnost’yu metodom konechnyh ob’yomov [Numerical assessment of the error in modeling evaporation using a single-speed multiphase fluid model with a free surface by the finite volume method]. Voprosy Atomnoj Nauki i Tehniki [Problems of Atomic Science and Technology], 2026, pp. 53–67 (in Russian).
     
  29. Kozelkov A. S., Puzan А. Y. Estimation of the numerical diffusion of the finite volume method in condensation modeling using a single-rate multiphase model of a liquid with a free surface. Engrg. Phys., 2024, No. 11, pp. 41–55, DOI: 10.25791/infizik.11.2024.1439.
     
  30. Kamei S., Hirata M. Study on condensation of a single vapor bubble into subcooled water-Part 2, experimental analysis. Heat Trans. Jpn. Res., 1990. 31. Samkhaniani N., Ansar M. Numerical simulation of bubble condensation using CF-VOF. Progress in Nuclear Energy, 2016, Vol. 89, pp. 120–131.
     
  31. Zeng Q., Cai J., Yin H. Numerical simulation of single bubble condensation in subcooled flow using OpenFOAM. Progress Nucl. Energy, 2015, Vol. 83, pp. 336–346.
     
  32. Elperin T., Fominykh A. Heat transfer during gas hydrate formation in gas-liquid slug flow. Heat and Mass Transfer, 1996, Vol. 31, pp. 179–183; DOI: 10.1007/BF02333317