Численная трёхмерная модель полного цикла процесса печного производства технического углерода
Численная трёхмерная модель полного цикла процесса печного производства технического углерода
Аннотация:
Настоящая работа посвящена разработке и анализу обобщённой численной модели процесса образования технического углерода (ТУ) в промышленных печных реакторах. Актуальность исследования обусловлена необходимостью повышения качества продукции, снижения производственных затрат и оптимизации технологических процессов на предприятиях, таких как ООО «ОмскТехУглерод». Модель базируется на фундаментальных уравнениях гидродинамики (RANS) и включает современные подходы к описанию ключевых физико-химических явлений. Для учёта сложных вихревых и анизотропных течений используется модель напряжений Рейнольдса (RSM). Турбулентное горение описывается с помощью PDF-модели фракции смеси (Non-Premixed Combustion), а кинетика сажеобразования (нуклеация, рост и окисление частиц) моделируется на основе двухстадийной модели Теснера с модификациями Магнуссена и Хертагера. Численное моделирование было проведено в программном комплексе ANSYS Fluent для двух различных конфигураций реакторов: 1) с предкамерой сжигания топлива и интенсивным перемешиванием; 2) с осевым сплошным потоком теплоносителя и радиальным впрыском сырья. В результате получены и проанализированы поля распределения ключевых параметров: температуры, концентраций компонентов, концентрации зародышей сажи и её массовой доли. Результаты показали, что разработанная модель адекватно воспроизводит основные стадии процесса: генерацию высокотемпературного теплоносителя, пиролиз сырья, образование зародышей в зонах с оптимальными температурами, последующий рост частиц и их частичное окисление. Сравнение конфигураций выявило влияние гидродинамики на локализацию зон сажеобразования, подтвердив при этом общность фундаментальных стадий процесса. Разработанная численная модель представляет собой ценный инструмент для качественного анализа сложных взаимосвязанных процессов в реакторах ТУ и закладывает основу для дальнейшей верификации, калибровки и оптимизации промышленных установок.
Литература:
- Зуев В. П., Михайлов В. В. Производство сажи. М.: Химия, 1965.
- Кошелев Ф. Ф., Корнев А. Е., Буканов А. М. Общая технология резины. М.: Химия, 1978.
- Magnussen B. F. On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow // Proc. of the 19-th AIAA Meeting, USA, St. Louis, 1981.
- Tesner P. A., Snegiriova T. D., Knorre V. G. Kinetics of dispersed carbon formation // Combust. Flame. 1971. P. 253–260.
- Brookes S. J., Moss J. B. Predictions of soot and thermal radiation properties in confined turbulent jet diffusion flames // Combust. Flame. 1999. N 116. P. 486–503.
- Frenklach M., Wang H. Detailed modeling of soot particle nucleation and growth // Symp. Int. Combust. 1991. N 23. P. 1559–1566.
- Yen A. C. Y. et al. Multiphase CFD modelling for enclosure fires - A review on past studies and future perspectives // Experimental and Computational Multiphase Flow. 2021. P. 1–25; DOI: 10.1007/s42757-021-0116-4
- Ghose P. et al. Effect of air flow distribution on soot formation and radiative heat transfer in a model liquid fluid spray combustor firing kerosene Int. J. Heat and Mass Transfer. 2014. N 74. P. 143–155.
- Palmer H. B., Cullis H. F. The formation of carbon from gases // Chemistry and Physics of Carbon. 1965. V. 1. P. 265.
- Haynes B. S., Wagner H. G. Soot formation // Progress in Energy and Combustion Science. 1981. V. 7, Iss. 4. P. 229–273.
- Glassman I. Soot formation in combustion processes // Symp. Int. Combust. 1989. V. 22, Iss. 1. P. 295–311.
- Tesner P. A., Snegiriova T. D., Knorre V. G. Investigating diesel engine performance and emissions using CFD // Combust. Flame. 1971. N 17. P. 253–260.
- Барышева О. Б., Хабибуллин Ю. Х., Садыков Р. А. Математическая модель сажеобразования в пламени гомогенной углеводородовоздушной смеси // Известия КазГАСУ. 2017. Т. 40, № 2. С. 312–321.
- Агафонов Г. Л., Власов П. А., Рябиков О. Б., Смирнов В. Н. Детальное кинетическое моделирование процесса сажеобразования: сравнение результатов расчетов методами моментов, секционным методом и дискретным методом Галеркина // Горение и взрыв. 2019. Т. 12, № 4. С. 33–53; DOI: 10.30826/CE19120404
- Галанин М. П., Исаев А. В., Конев С. А. Математическая модель образования сажи при диффузионном горении толуола // Математическое моделирование. 2020. Т. 32, № 6. С. 66–80; DOI: 10.20948/mm-2020-06-05
- Галанин М. П., Исаев А. В., Конев С. А. О моделировании образования сажи при диффузионном горении углеводородных топлив // Препринты ИПМ им. М. В. Келдыша РАН. 2019. № 110.
- Jones W. P., Whitelaw J. H. Calculation methods for reacting turbulent flows: A review // Combust. Flame. 1982. N 48, P. 1–26.
- Chen T., Li T., Sjöblom J., Ström H. A reactor-scale CFD model of soot formation during hightemperature pyrolysis and gasification of biomass // Fuel. 2021. V. 303. Article number 121240; DOI: 10.1016/j.fuel.2021.121240
- Moghiman M., Hosseini N., Ghodsirad M., Javadi M. (2008). Experimental and Numerical Studies of Carbon Black Formation Through Thermal Decomposition of Waste Natural Gas // Combust. Sci. Eng. 2008. N 3; DOI: 10.1115/IMECE2008-68883
- Cherny S. G., Zeziulin I. V., Tarraf D., Pochuev A. P., Boronenko I. S. The direct and inverse problems of modeling the carbon black furnace production process // Euras. J. Math. Comput. Appl. 2025. V. 13, Iss. 2. P. 13–42; DOI: 10.32523/2306-6172-2025-13-2-13-42
- Аксенов А. А., Жлуктов С. В., Каширин В. С. , Сазонова М. Л., Черный С. Г., Дроздова Е. А., Роде А. А. Численное моделирование в ПК FlowVision распыла и испарения сырья в потоке газа теплоносителя при печном производстве технического углерода // Компьютерные исследования и моделирование. 2023. Т. 15, вып. 4. С. 921–939; DOI: 10.20537/2076-7633-2023-15-4-921-939
- Mazzotta L., Lamioni R., Agati G., Evangelisti A., Rispoli F., Valera-Medina A., Borello D. On the Impact of CFD Turbulence Models for Premixed NH3/H2 Combustion on Emissions and Flame Characteristics in a Swirl-Stabilized Burner // Flow, Turbulence Combust. 2025. V. 114. P. 1043–1063; DOI: 10.1007/s10494-025-00638-7
- Wang S. S., Wang S. Compressibility-improved γ − Reθt-based Reynolds stress transition model for transonic wing–body flow // AIAA Journal. 2025. DOI: 10.2514/1.J064918
- Stollinger M., Naud B., Roekaerts D., Beishuizen N., Heinz S. PDF modeling and simulations of pulverized coal combustion. Part 2: Application // Combust. Flame. 2013. V. 160, N 2. P. 384-395; DOI: 10.1016/j.combustflame.2012.10.010
- Stollinger M., Heinz S. (2008). PDF modeling and simulation of premixed turbulent combustion // Monte Carlo Methods and Applications. 2008. V. 14. P. 343–377; DOI: 10.1515/MCMA.2008.016
Исследования выполнены в рамках государственного задания Института теплофизики им. С. С. Кутателадзе СО РАН (проект 125031904210-0). Других источников финансирования проведения или руководства данным конкретным исследованием не было.
А. П. Почуев
- Новосибирский государственный университет,
ул. Пирогова, 2, г. Новосибирск 630090, Россия
С. Г. Черный
- Институт теплофизики им. С. С. Кутателадзе СО РАН,
просп. Акад. Лаврентьева, 1, г. Новосибирск 630090, Россия
E-mail: sgcherny2023@yandex.ru
Статья поступила 08.09.2025 г.
После доработки — 03.12.2025 г.
Принята к публикации 13.05.2026 г.
Abstract:
This paper is devoted to the development and analysis of a generalized numerical model of the carbon black (CB) formation process in industrial furnace reactors. The relevance of the study is driven by the practical demand for improving product quality, reducing production costs, and optimizing manufacturing regimes at enterprises such as Omsk Carbon Group. The model is based on the Reynolds-Averaged Navier–Stokes (RANS) equations and incorporates modern approaches to describing the underlying physicochemical phenomena. The Reynolds Stress Model (RSM) is employed to account for complex swirling and anisotropic turbulent flow features. Turbulent combustion is simulated using the non-premixed mixture fraction Probability Density Function (PDF) model, while soot kinetics (nucleation, particle growth, and oxidation) are described via Tesner’s two-step model modified by Magnussen and Hjertager. Numerical simulations were performed in ANSYS Fluent for two distinct reactor configurations: 1) a reactor with a fuel precombustion chamber and intense swirling mixing; 2) a reactor with a continuous axial flow of high-temperature carrier gas and radial feedstock injection. Spatial distributions of temperature, chemical species concentrations, soot nuclei number density, and carbon black mass fraction were obtained and analyzed. The results show that the developed model adequately reproduces the sequential stages of the process: high-temperature carrier gas generation, feedstock pyrolysis, nuclei formation in optimal temperature zones, subsequent particle growth, and partial oxidation. A comparative analysis of both configurations revealed the significant influence of hydrodynamics on the localization of soot synthesis zones while confirming the commonality of the fundamental process stages. The proposed numerical model serves as an effective engineering tool for qualitative analysis of coupled transport and reaction processes in carbon black reactors and lays the groundwork for further experimental verification, calibration, and optimization of industrial units.
References:
- Zuev V. P., Mikhailov V. V. Proizvodstvo sazhi [Soot production]. Moscow: Chemistry, 1965 (in Russian).
- Koshelev F. F., Kornev A. E., Bukanov A. M. Obshchaya tehnologiya reziny [General rubber technology]. Moscow: Chemistry, 1978 (in Russian).
- Magnussen B. F. On the structure of turbulence and a generalized eddy dissipation concept for chemical reaction in turbulent flow. Proc. of the 19-th AIAA Meeting, USA, St. Louis, 1981.
- Tesner P. A., Snegiriova T. D., Knorre V. G. Kinetics of dispersed carbon formation. Combust. Flame, 1971, pp. 253–260.
- Brookes S. J., Moss J. B. Predictions of soot and thermal radiation properties in confined turbulent jet diffusion flames. Combust. Flame, 1999, No. 116, pp. 486–503.
- Frenklach M., Wang H. Detailed modeling of soot particle nucleation and growth. Symp. Int. Combust., 1991, No. 23, pp. 1559–1566.
- Yen A. C. Y. et al. Multiphase CFD modelling for enclosure fires - A review on past studies and future perspectives. Experimental and Computational Multiphase Flow, 2021, pp. 1–25; DOI: 10.1007/s42757-021-0116-4
- Ghose P. et al. Effect of air flow distribution on soot formation and radiative heat transfer in a model liquid fluid spray combustor firing kerosene. Int. J. Heat and Mass Transfer, 2014, No. 74, pp. 143–155.
- Palmer H. B., Cullis H. F. The formation of carbon from gases. Chemistry and Physics of Carbon, 1965, Vol. 1, pp. 265.
- Haynes B. S., Wagner H. G. Soot formation. Progress in Energy and Combustion Science, 1981. V. 7, Iss. 4. P. 229–273.
- Glassman I. Soot formation in combustion processes. Symp. Int. Combust., 1989. V. 22, Iss. 1. P. 295–311.
- Tesner P. A., Snegiriova T. D., Knorre V. G. Investigating diesel engine performance and emissions using CFD. Combust. Flame, 1971, No. 17, pp. 253–260.
- Barysheva O. B., Khabibullin Yu. Kh., Sadykov R. A. Matematicheskaya model’ sazheobrazovaniya v plameni gomogennoj uglevodorodovozdushnoj smesi [Mathematical model of soot formation in a homogeneous hydrocarbon-air mixture flame]. Izvestiya KazGASU, 2017, Vol. 40, No. 2, pp. 312–321 (in Russian).
- Agafonov G. L., Vlasov P. A., Ryabikov O. B., Smirnov V. N. Detal’noe kineticheskoe modelirovanie processa sazheobrazovaniya: sravnenie rezul’tatov raschetov metodam i momentov, sekcionnym metodom i diskretnym metodom Galerkina [Detailed kinetic modeling of the soot formation process: Comparison of calculation results by the method of moments, the sectional method, and the discrete Galerkin method]. Gorenie i Vzryv [Combustion and Explosion], 2019, No. 12, pp. 33–53 (in Russian); DOI: 10.30826/CE19120404
- Galanin M. P., Isaev A. V., Konev S. A. Matematicheskaya model’ obrazovaniya sazhi pri diffuzionnom gorenii toluol [Mathematical model of soot formation during the diffusion combustion of toluene]. Mat. Model. [Math. Model.], 2020, Vol. 32, No. 6, p. 66–80 (in Russian).
- Galanin M. P., Isaev A. V., Konev S. A. O modelirovanii obrazovaniya sazhi pri diffuzionnom gorenii uglevodorodnyh topliv [On modeling soot formation during the diffusion combustion of hydrocarbon fuels]. Keldysh Institute Preprints, 2019, No. 110 (in Russian); DOI: 10.20948/prepr-2019-110
- Jones W. P., Whitelaw J. H. Calculation methods for reacting turbulent flows: A review. Combust. Flame, 1982, No. 48, pp. 1–26.
- Chen T., Li T., Sjöblom J., Ström H. A reactor-scale CFD model of soot formation during hightemperature pyrolysis and gasification of biomass. Fuel, 2021, Vol. 303, Article number 121240; DOI: 10.1016/j.fuel.2021.121240
- Moghiman M., Hosseini N., Ghodsirad M., Javadi M. (2008). Experimental and Numerical Studies of Carbon Black Formation Through Thermal Decomposition of Waste Natural Gas. Combust. Sci. Eng., 2008, No. 3; DOI: 10.1115/IMECE2008-68883
- Cherny S. G., Zeziulin I. V., Tarraf D., Pochuev A. P., Boronenko I. S. The direct and inverse problems of modeling the carbon black furnace production process. Euras. J. Math. Comput. Appl., 2025, Vol. 13, Iss. 2, pp. 13–42; DOI: 10.32523/2306-6172-2025-13-2-13-42
- Aksenov A. A., Zhluktov S. V., Kashirin V. S., Sazonova M. L., Cherny S. G., Drozdova E. A., Rode A. A. Chislennoe modelirovanie v PK FlowVision raspyla i ispareniya syr’ya v potoke gaza-teplonositelya pri pechnom proizvodstve tehnicheskogo ugleroda [Numerical simulation in FlowVision software package of raw material atomization and evaporation in a heat-carrier gas flow during the furnace production of carbon black]. Comput. Res. Model., 2023, Vol. 15, No. 4, pp. 921–939 (in Russian); DOI: 10.20537/2076-7633-2023-15-4-921-939
- Mazzotta L., Lamioni R., Agati G., Evangelisti A., Rispoli F., Valera-Medina A., Borello D. On the impact of CFD turbulence models for premixed NH3/H2 combustion on emissions and flame characteristics in a swirl-stabilized burner. Flow, Turbulence Combust., 2025, Vol. 114, pp. 1043–1063; DOI: 10.1007/s10494-025-00638-7
- Wang S. S., Wang S. Compressibility-improved γ − Reθt-based Reynolds stress transition model for transonic wing–body flow. AIAA Journal, 2025; DOI: 10.2514/1.J064918
- Stollinger M., Naud B., Roekaerts D., Beishuizen N., Heinz S. PDF modeling and simulations of pulverized coal combustion. Part 2: Application. Combust. Flame, 2013, Vol. 160, No. 2, pp. 384-395; DOI: 10.1016/j.combustflame.2012.10.010
- Stollinger M., Heinz S. (2008). PDF modeling and simulation of premixed turbulent combustion. Monte Carlo Methods and Applications, 2008, Vol. 14, pp. 343–377; DOI: 10.1515/MCMA.2008.016
