Оптимизационное проектирование технологии производства технического углерода
Оптимизационное проектирование технологии производства технического углерода
Аннотация:
Поставлены и решены многокритериальные оптимизационные задачи моделирования процесса распыла и испарения жидкого углеводородного сырья в реакторе печного производства технического углерода. Их решения дают регламент работы реактора, при котором достигаются наибольшие дисперсность и структурность технического углерода при минимальном его загрязнении коксом и в то же время при достаточно высоком выходе продукта. Целевые функции определяются по численному решению прямой задачи распыла и испарения сырья, сформулированной на основе трёхмерной модели Эйлера (Eulerian), принадлежащей эйлерово-эйлерову подходу к описанию многофазных течений в ПК ANSYS. В построенных таким образом целевых функциях учтена теоретическая и эмпирическая информация о влиянии параметров углеводородов в реакционной зоне на дисперсность и структурность технического углерода. В частности, учтена простейшая взаимосвязь — чем выше концентрация углеводородов в реакционной зоне, тем выше структурность технического углерода. В качестве целевой функций может быть взят коагуляционный параметр структурообразования ψ, учитывающий концентрацию, средний диаметр и средний заряд частиц технического углерода перед коагуляцией. С увеличением ψ показатель структурности частиц технического углерода возрастает. В качестве целевой функции планируется рассмотреть среднее отклонение размеров капель. На концентрацию и средний диаметр частиц перед коагуляцией, кроме температуры процесса и начальной концентрации углеводородного сырья в реакторе, оказывает влияние изменение числа ароматических колец в средней молекуле сырья. Рост колец приводит к возрастанию структурности технического углерода. В построенные в работе целевые функции также заложены механизмы достижения заданной степени мелкости распыла сырья, равномерности распределения капель, обеспечения полного испарения сырья, исключения контакта неиспарившегося сырья с футеровкой реактора (со стенкой), так как такой контакт приводит к образованию кокса. Для достижения экстремумов перечисленных функционалов варьируются скорость и температура газа-теплоносителя на входе в реактор, скорость и температура закачиваемого сырья. Оптимизационная задача решается с помощью генетического метода. Представлены результаты проведённых численных экспериментов.
Литература:
- Ansys Ansys Fluent (Version 2023). Canonsburg, PA: Ansys, Inc., 2023.
- Черный С. Г., Чирков Д. В., Лапин В. Н., Скороспелов В. А., Шаров С. В. Численное моделирование течений в турбомашинах. Новосибирск: Наука, 2006.
- Гюльмисарян Т. Г., Капустин В. М., Левенберг И. П. Технический углерод: морфология, свойства, производство. М.: Издательство Каучук и резина, 2017.
- Орлов В. Ю., Комаров А. М., Ляпина Л. А. Производство и использование технического углерода для резин. Ярославль: Издательство Александр Рутман, 2002.
- Schiller L., Naumann Z. A drag coefficient correlation // Verein Deutscher Ingenieure. 1935. V. 77. P. 318.
- Ranz W. E., Marshall W. R. Vaporation from Drops, Part I // Chem. Eng. Prog. 1952. V. 48, N 3. P. 141–146.
- Ranz W. E., Marshall W. R. Vaporation from Drops, Part II // Chem. Eng. Prog. 1952. V. 48, N 4. P. 173–180.
- Lee W. H. A Pressure Iteration Scheme for Two-Phase Flow Modeling (LA-UR 79-975). Los Alamos, NM: Los Alamos Scientific Laboratory, 1979.
- Whitman W. G. The two-film theory of gas absorption // Chem. Met. Eng. 1923. V. 29. P. 146.
- Черный С. Г., Тарраф Д. Об особенностях моделирования распада струи жидкости на капли в потоке газа // Вестн. НГУ. Сер.: Информационные технологии. 2025. T. 23, N 1. С. 67–87; DOI: 10.25205/1818-7900-2025-23-1-67-87
- Сипатов А. М., Карабасов С. А., Гомзиков Л. Ю., Абрамчук Т. В., Семаков Г. Н. Моделирование процесса распыла с использованием адаптивных сеточных моделей // Вычислительная механика сплошных сред. 2015. T. 8, No 1. С. 93–101.
- Wu P. K., Kirkendall K. A., Fuller R. P., Nejad A. S. Spray structures of liquid jets atomized in subsonic crossflows // J. Propul. Power. 1998. V. 14, N 2. P. 173–182; DOI: 10.2514/2.5283
- Brandt M., Rachner M., Schmitz G. An experimental and numerical study of kerosine spray evaporation in a premix duct for gas turbine combustors at high pressure // Combustion Sci. Techn. 1998. V. 138, N 1. P. 313–348; DOI: 10.1080/00102209808952074
- Volkov R. S., Kuznetsov G. V., Strizhak P. A. Influence of droplet concentration on evaporation in a hightemperature gas // Int. J. Heat and Mass Transfer. 2016. V. 96. P. 20–28.
- Cherny S. G., Zeziulin I. V., Tarraf D., Pochuev A. P., Boronenko I. S. The direct and inverse problems of modeling the carbon black furnace production process // Euras. J. Math. Comput. Appl. 2025. V. 13, N 2. P. 13–42; DOI: 10.32523/2306-6172-2025-13-2-13-42
- Fonseca C. M., Fleming P. J. Genetic algorithms for multiobjective optimization formulation, discussion and generalization // Proc. 5th Int. Conf. on Genetic Algorithms. 1993.
- Horn J., Nafpliotis N. Multiobjective Optimization Using The Niched Pareto Genetic Algorithm (IlliGAL Report 93005). Urbana: University of Illinois, 1993.
- Goldberg D. E., Richardson J. J. Genetic algorithms with sharing for multimodal function optimization // Proc. 2nd ICGA. 1987.
- Aksenov A. A., Zhluktov S. V., Kashirin V. S., Sazonova M. L., Cherny S. G., Drozdova E. A., Rode A. A. Numerical simulation in the flowvision software of spraying and evaporation of feedstock in a heat-carrier gas flow in the furnace production of technical carbon // Comput. Research and Modeling. 2023. V. 15, N 4. P. 921–939; DOI: 10.20537/2076-7633-2023-15-4-921-939
Исследования выполнены в рамках государственного задания Института теплофизики им. С. С. Кутателадзе СО РАН (проект 125031904210-0). Других источников финансирования проведения или руководства данным конкретным исследованием не было.
С. Г. Черный
- Институт теплофизики им. С. С. Кутателадзе СО РАН,
просп. Акад. Лаврентьева, 1, Россия 630090, Новосибирск
E-mail: sgcherny2023@yandex.ru
Д. Тарраф
- Новосибирский государственный университет,
ул. Пирогова, 2, Россия 630090, Новосибирск
E-mail: daniel.tarraf.93@gmail.com
Статья поступила 12.09.2025 г.
После доработки — 26.12.2025 г.
Принята к публикации 13.05.2026 г.
Abstract:
This study formulates and solves multi-objective optimization problems related to modeling the spray and evaporation processes of liquid hydrocarbon feedstock in a furnace reactor used for carbon black production. The solutions define reactor operating conditions that maximize the dispersion and structural integrity of carbon black while minimizing contamination with coke and maintaining a sufficiently high product yield. Objective functions are derived from numerical solutions to the direct problem of spray and evaporation, based on a three-dimensional Eulerian model within the Euler–Euler framework for multiphase flow simulation in ANSYS. These functions incorporate both theoretical and empirical data on how hydrocarbon parameters in the reaction zone affect the dispersion and structure of carbon black. A key relationship is considered: the higher the hydrocarbon concentration in the reaction zone, the greater the structural integrity of the carbon black. One proposed objective function is the coagulation parameter of structure formation, ?, which accounts for the concentration, average diameter, and average charge of carbon black particles prior to coagulation. As ? increases, the structural integrity of the particles improves. Another objective function considered is the mean deviation of droplet sizes. Besides process temperature and initial hydrocarbon concentration, the number of aromatic rings in the average feedstock molecule also affects particle concentration and diameter before coagulation. An increase in aromatic rings leads to higher structural integrity of carbon black. The constructed objective functions also incorporate mechanisms for achieving the desired spray fineness, uniform droplet distribution, complete evaporation of feedstock, and prevention of contact between un-evaporated feedstock and the reactor lining (walls), as such contact leads to coke formation. To reach the extrema of these functionals, the velocity and temperature of the carrier gas at the reactor inlet, as well as the velocity and temperature of the injected feedstock, are varied. The optimization problem is solved using a genetic algorithm. Results of the numerical experiments are presented in the article.
References:
- Ansys Ansys Fluent (Version 2023). Canonsburg, PA: Ansys, Inc., 2023.
- Cherny S. G., Chirkov D. V., Lapin V. N., et al. Chislennoe modelirovanie techenij v turbomashinah [Numerical modeling of flows in turbomachines]. Novosibirsk: Nauka, 2006 (in Russian).
- Gulmisaryan T. G., Kapustin V. M., Levenberg I. P. Tehnicheskij uglerod: morfologiya, svojstva, proizvodstvo [Technical carbon: morphology, properties, production]. Moscow: Kauchuk i Rezina Publ., 2017 (in Russian).
- Orlov V. Yu., Komarov A. M., Lyapina L. A. Proizvodstvo i ispol’zovanie tehnicheskogo ugleroda dlya rezin. [Production and use of technical carbon for rubbers]. Yaroslavl: Aleksandr Rutman Publ., 2002 (in Russian).
- Schiller L., Naumann Z. A drag coefficient correlation. Verein Deutscher Ingenieure, 1935, Vol. 77, pp. 318.
- Ranz W. E., Marshall W. R. Vaporation from Drops, Part I. Chem. Eng. Prog., 1952, Vol. 48, No. 3, pp. 141–146.
- Ranz W. E., Marshall W. R. Vaporation from Drops, Part II. Chem. Eng. Prog., 1952, Vol. 48, No. 4, pp. 173–180.
- Lee W. H. A Pressure Iteration Scheme for Two-Phase Flow Modeling (LA-UR 79-975). Los Alamos, NM: Los Alamos Scientific Laboratory, 1979.
- Whitman W. G. The two-film theory of gas absorption. Chem. Met. Eng., 1923, Vol. 29, pp. 146.
- Cherny S. G., Tarraf D. Ob osobennostyah modelirovaniya raspada strui zhidkosti na kapli v potoke gaza [On the Features of Modeling Liquid Jet Breakup into Droplets in a Gas Flow]. Bulletin of NSU. Series: Information Technologies, 2025, Vol. 23, No. 1, pp. 67–87 (in Russian); DOI: 10.25205/1818-7900-2025-23-1-67-87
- Sipatov A. M., Karabasov S. A., Gomzikov L. Yu., Abramchuk T. V., Semakov G. N. Modelirovanie processa raspyla s ispol’zovaniem adaptivnyh setochnyh modelej [Modeling of the Spray Process Using Adaptive Grid Models]. Vychislitel’naya Mehanika Sploshnyh Sred [Comput. Mech. Continuous Media], 2015. Vol. 8, No. 1, pp. 93–101 (in Russian); DOI: 10.7242/1999-6691/2015.8.1.8
- Wu P. K., Kirkendall K. A., Fuller R. P., Nejad A. S. Spray structures of liquid jets atomized in subsonic crossflows // J. Propul. Power, 1998, Vol. 14, No. 2, pp. 173–182; DOI: 10.2514/2.5283
- Brandt M., Rachner M., Schmitz G. An experimental and numerical study of kerosine spray evaporation in a premix duct for gas turbine combustors at high pressure. Combustion Sci. Techn., 1998, Vol. 138, No. 1, pp. 313–348; DOI: 10.1080/00102209808952074
- Volkov R. S., Kuznetsov G. V., Strizhak P. A. Influence of droplet concentration on evaporation in a hightemperature gas. Int. J. Heat and Mass Transfer, 2016, Vol. 96, pp. 20–28.
- Cherny S. G., Zeziulin I. V., Tarraf D., Pochuev A. P., Boronenko I. S. The direct and inverse problems of modeling the carbon black furnace production process. Euras. J. Math. Comput. Appl., 2025, Vol. 13, No. 2, pp. 13–42; DOI: 10.32523/2306-6172-2025-13-2-13-42
- Fonseca C. M., Fleming P. J. Genetic algorithms for multiobjective optimization formulation, discussion and generalization. Proc. 5th Int. Conf. on Genetic Algorithms, 1993.
- Horn J., Nafpliotis N. Multiobjective Optimization Using The Niched Pareto Genetic Algorithm (IlliGAL Report 93005). Urbana: University of Illinois, 1993.
- Goldberg D. E., Richardson J. J. Genetic algorithms with sharing for multimodal function optimization. Proc. 2nd ICGA, 1987.
- Aksenov A. A., Zhluktov S. V., Kashirin V. S., Sazonova M. L., Cherny S. G., Drozdova E. A., Rode A. A. Numerical simulation in the flowvision software of spraying and evaporation of feedstock in a heat-carrier gas flow in the furnace production of technical carbon. Comput. Research and Modeling, 2023, Vol. 15, No. 4, pp. 921–939; DOI: 10.20537/2076-7633-2023-15-4-921-939
