Вывод эффективного коэффициента переноса для гетерогенной среды с иерархической структурой, используя формализм обобщённой производной

Вывод эффективного коэффициента переноса для гетерогенной среды с иерархической структурой, используя формализм обобщённой производной

Мишин А. В.

УДК 539.3 
DOI: 10.33048/SIBJIM.2026.29.307


Аннотация:

Представлены операции по гомогенизации стационарного уравнения теплопроводности с уравнением состояния типа Фурье. Гетерогенная среда является двухфазной и обладает иерархической структурой (гетерогенная среда, вложенная в гетерогенную среду). Используется метод условных моментов и формализм обобщённой производной, учитывающий конфигурацию внутренних границ гетерогенной системы. Для учёта многоуровневой структуры гомогенизация осуществляется для ограниченной неоднородной среды. Получение эффективного коэффициента проводится для трёхмерного пространства и далее обобщается для пространства произвольной размерности. Анализируется механизм появления характерных размеров фаз в эффективном коэффициенте, являющийся следствием использования формализма обобщённой производной и проведения гомогенизации для ограниченной системы. Проводимые операции показывают наличие эффективного числа степеней свободы для анализируемого поля в гетерогенной среде. Рассмотрено влияние условий на межфазных границах на итоговый эффективный коэффициент.

Литература:
  1. Li C., Thostenson E. T., Chou T.-W. Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites // Polymer. 2011. V. 52, N 13. P. 2964–2973.
     
  2. Sahimi M. Flow phenomena in rocks: from continuum models to fractals, percolation, cellular automata, and simulated annealing // Reviews of Modern Physics. 1993. V. 65, N 4. P. 1393–1534.
     
  3. Savatorova V. L., Talonov A. V., Vlasov A. N., Volkov-Bogorodsky D.B. Multiscale modeling of thermoelastic properties of composites with periodic structure of heterogeneities // Materials Physics and Mechanics. 2012. V. 13. P. 130–142.
     
  4. Rutqvist J., Wu Y.-S., Tsang C.-F., Bodvarsson G. A numerical model for thermo-hydro-mechanical coupling in fractured rock // Internat. J. Rock Mechanics Mining Sci. 2002. V. 39, N 4. P. 429–442.
     
  5. Ostoja-Starzewski M. Towards thermoelasticity of fractal media // J. Thermal Stresses. 2007. V. 30, N 9–10. P. 889–896; DOI: 10.1080/01495730701495618.
     
  6. Cowin S. C. Bone poroelasticity // J. Biomechanics. 1999. V. 32, N 3. P. 217–238.
     
  7. Hamm S., Bidaux P. Dual-porosity fractal models for transient flow analysis in fissured rocks // Water Resources Research. 1996. V. 32, N 4. P. 959–970.
     
  8. Ghosh S., Lee K., Moorthy S. A multi-level computational model for multi-scale damage analysis in composite and porous materials // Internat. J. Solids and Structures. 2001. V. 38, N 14. P. 2335–2385.
     
  9. Ghosh S. Numerical homogenization of $n$-component composites including stochastic interface defects // Internat. J. Numerical Methods in Engineering. 1995. V. 38, N 6. P. 1087–1121.
     
  10. Li X., Korayem A. H., Li C., Liu Y., He H., Sanjayan J. G. Incorporation of graphene oxide and silica fume into cement paste: A study of dispersion and compressive strength // Construction and Building Materials. 2016. V. 123. P. 332–342.
     
  11. Fu S. Y., Lauke B., Mader E. Hybrid composites with metal and ceramic fillers: microstructure and mechanical properties // Composites Science and Technology. 2008. V. 68, N 7—8. P. 1831–1838.
     
  12. Fratzl P., Burgert I. Bioinspired materials research: What can we really learn from nature’s structural materials? // J. Royal Society Interface. 2007. V. 4, N 15. P. 637–642.
     
  13. Мишин А. В. Учёт обобщённой производной и коллективного влияния фаз на процесс гомогенизации // Сиб. журн. индустр. математики. 2022. Т. 25, № 4. С. 86–98.
     
  14. Khoroshun L. P. Mathematical models and methods of the mechanics of stochastic composites // Appl. Mechanics. 2000. V. 30, N 10. P. 30–62.
     
  15. Khoroshun L. P. A new mathematical model of the nonuniform deformation of composites // Mekh. Сompos. Mater. 1995. V. 31, N 3. P. 310–318.
     
  16. Шермергор Т. Д. Теория упругости микронеоднородных сред. М.: Наука, 1977.
     
  17. Christensen R. M. Theory of Viscoelasticity. An Introduction. N. Y.: Academic Press, 1982.
     
  18. Бахвалов Н. С., Панасенко Г. П. Осреднение процессов в периодических средах. М.: Наука, 1984.
     
  19. Hashin Z., Shtrikman S. On some variational principles in anisotropic and nonhomogeneous elasticity // J. Mech. Phys. Solids. 1962. V. 10, N 4. P. 335–342.
     
  20. Bruggeman D. A. G. Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. II. Dielektrizitatskonstanten und Leitfahigkeiten von Vielrkistallen der nichtregularen Systeme // Ann. Phys. 1936. Bd. 417, N 25. P. 645–672.
     
  21. Hill R. A. Self-consistent mechanics of composite materials // J. Mech. Phys. Solids. 1965. V. 13, N 4. P. 213–222.
     
  22. Эшелби Дж. Континуальная теория дислокаций. М.: Изд-во иностр. лит., 1963.
     
  23. Болотин В. В., Москаленко В. Н. Определение упругих констант микронеоднородной среды // Журн. Прикл. Мех. Техн. Физ. 1968. Т. 34, № 1. С. 66–72.
     
  24. Нигматуллин Р. И. Основы механики гетерогенных сред. М.: Наука, 1978.
     
  25. Жидков В. В., Козлов С. М., Олейник О. А. Усреднение дифференциальных операторов. М.: Физматлит, 1993.
     
  26. Piatnitski A. L., Chechkin G. A., Shamaev A. S. Homogenization: Methods and Applications. AMS, 2007.
     
  27. Ponte Castaneda P., Willis J. R. The effect of spatial distribution on the effective behavior of composite materials and cracked media // J. Mech Phys Solids. 1995. V. 43. P. 1919–1951.
     
  28. Mori T., Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions // Acta Metall. 1973. V. 21. P. 571–574.
     
  29. Fedotov A. The hybrid homogenization model of elastic anisotropic porous materials // J. Mater. Sci. 2018. V. 53. P. 5092–5102.
     
  30. Шварц Л. Математические методы для физических наук. М.: Мир, 1965.
     
  31. Мишин А. В. Обобщённая производная и её использование для анализа микроструктуры гетерогенной среды // Сиб. журн. индустр. математики. 2021. Т. 24, № 4. С. 79–96; DOI: 10.33048/SIBJIM.2021.24.406
     
  32. Боголюбов А. Н., Левашова Н. Т., Могилевский И. Е., Мухартова Ю. В., Шапкина Н. Е. Функция Грина оператора Лапласа. Москва: изд-во МГУ, 2018.
     
  33. Khoroshun L. P. Random functions theory in problems on the macroscopic characteristics of microinhomogeneous media // Appl. Mechanics. 1978. V. 14. P. 3–17.

Работа выполнена при финансовой поддержке Министерства науки и высшего образования Российской Федерации в рамках проекта № 075-15-2025-459 «Научное обоснование и создание инфраструктуры на основе использования синхротронного излучения для диагностики функционально-градиентных материалов»


А. В. Мишин
  1. Институт теоретической и прикладной механики им. С. А. Христиановича СО РАН, 
    ул. Институтская, 4/1, г. Новосибирск 630090, Россия
  2. Новосибирский государственный университет, 
    ул. Пирогова, 1, г. Новосибирск 630090, Россия

E-mail: mishinav@itam.nsc.ru 

Статья поступила 13.03.2026 г.
После доработки — 22.06.2026 г.
Принята к публикации 16.09.2026 г.

Abstract:

This paper presents operations for homogenizing a stationary heat conduction equation with a Fourier-type equation of state. The heterogeneous medium is two-phase and has a hierarchical structure (a heterogeneous medium nested within a heterogeneous medium). The method of conditional moments and the generalized derivative formalism taking into account the configuration of the internal boundaries of the heterogeneous system are used. To account for the multilevel structure, homogenization is performed for a bounded inhomogeneous medium. The effective coefficient is obtained for a three-dimensional space and then generalized to a space of arbitrary dimension. The mechanism for the appearance of characteristic phase sizes in the effective coefficient is analyzed, resulting from the use of the generalized derivative formalism and homogenization for a bounded system. The operations performed demonstrate the presence of an effective number of degrees of freedom for the analyzed field in a heterogeneous medium. The influence of conditions at interphase boundaries on the resulting effective coefficient is considered.

References:
  1. Li C., Thostenson E. T., Chou T.-W. Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites. Polymer, 2011, Vol. 52, No. 13, pp. 2964–2973.
     
  2. Sahimi M. Flow phenomena in rocks: From continuum models to fractals, percolation, cellular automata, and simulated annealing. Reviews of Modern Physics, 1993, Vol. 65, No. 4, pp. 1393–1534.
     
  3. Savatorova V. L., Talonov A. V., Vlasov A. N., Volkov-Bogorodsky D. B. Multiscale modeling of thermoelastic properties of composites with periodic structure of heterogeneities. Materials Physics and Mechanics, 2012, Vol. 13, pp. 130–142.
     
  4. Rutqvist J., Wu Y.-S., Tsang C.-F., Bodvarsson G. A numerical model for thermo-hydro-mechanical coupling in fractured rock. Internat. J. Rock Mechanics Mining Sci., 2002, Vol. 39, No. 4, pp. 429–442.
     
  5. Ostoja-Starzewski M. Towards thermoelasticity of fractal media. J. Thermal Stresses, 2007, Vol. 30, No. 9–10, pp. 889–896; DOI: 10.1080/01495730701495618.
     
  6. Cowin S. C. Bone poroelasticity. J. Biomechanics, 1999, Vol. 32, No. 3, pp. 217–238.
     
  7. Hamm S., Bidaux P. Dual-porosity fractal models for transient flow analysis in fissured rocks. Water Resources Research, 1996, Vol. 32, No. 4, pp. 959–970.
     
  8. Ghosh S., Lee K., Moorthy S. A multi-level computational model for multi-scale damage analysis in composite and porous materials. Internat. J. Solids and Structures, 2001, Vol. 38, No. 14, pp. 2335– 2385.
     
  9. Ghosh S. Numerical homogenization of $n$-component composites including stochastic interface defects. Internat. J. Numerical Methods in Engineering, 1995, Vol. 38, No. 6, pp. 1087–1121.
     
  10. Li X., Korayem A. H., Li C., Liu Y., He H., Sanjayan J. G. Incorporation of graphene oxide and silica fume into cement paste: A study of dispersion and compressive strength. Construction and Building Materials, 2016, Vol. 123, pp. 332–342.
     
  11. Fu S. Y., Lauke B., Mader E. Hybrid composites with metal and ceramic fillers: microstructure and mechanical properties. Composites Science and Technology, 2008, Vol. 68, No. 7—8, pp. 1831–1838.
     
  12. Fratzl P., Burgert I. Bioinspired materials research: what can we really learn from nature’s structural materials? J. Royal Society Interface, 2007, Vol. 4, No. 15, pp. 637–642.
     
  13. Mishin A. V. Uchyot obobshchyonnoj proizvodnoj i kollektivnogo vliyaniya faz na process gomogenizacii [Accounting for the generalized derivative and the collective influence of phases on the homogenization process]. Sib. Zhurn. Indust. Mat., 2022, Vol. 25, No. 4, pp. 86–98 (in Russian).
     
  14. Khoroshun L. P. Mathematical models and methods of the mechanics of stochastic composites. Appl. Mechanics, 2000, Vol. 30, No. 10, pp. 30–62.
     
  15. Khoroshun L. P. A new mathematical model of the nonuniform deformation of composites. Mekh. Сompos. Mater., 1995, Vol. 31, No. 3, pp. 310–318.
     
  16. Shermergor T. D. Elasticity theory for microinhomogeneous Materials. Moscow: Nauka, 1977 (in Russian).
     
  17. Christensen R. M. Theory of Viscoelasticity. An Introduction. N. Y.: Academic Press, 1982.
     
  18. Bahvalov N. S., Panasenko G. P. Osrednenie processov v periodicheskih sredah [Averaging of processes in periodic media]. Moscow: Nauka, 1984 (in Russian).
     
  19. Hashin Z., Shtrikman S. On some variational principles in anisotropic and nonhomogeneous elasticity. J. Mech. Phys. Solids, 1962, Vol. 10, No. 4, pp. 335–342.
     
  20. Bruggeman D. A. G. Berechnung verschiedener physikalischer Konstanten von heterogenen Substanzen. II. Dielektrizitatskonstanten und Leitfahigkeiten von Vielrkistallen der nichtregularen Systeme. Ann. Phys., 1936, Bd. 417, No. 25, pp. 645–672.
     
  21. Hill R. A. Self-consistent mechanics of composite materials. J. Mech. Phys. Solids, 1965, Vol. 13, No. 4, pp. 213–222.
     
  22. Ashby J. Continuum Theory of Dislocations. Moscow: Foreign Literature Publ., 1963 (in Russian).
     
  23. Bolotin V. V., Moskalenko V. N. Determination of the elastic constants of a micro inhomogeneous medium. Zh. Prikl. Mekh. Tekhn. Fiz., 1968, Vol. 34, No. 1, pp. 66–72 (in Russian).
     
  24. Nigmatullin R. I. Osnovy mehaniki geterogennyh sred [Fundamentals of the mechanics of heterogeneous media]. Moscow: Nauka, 1978 (in Russian).
     
  25. Zhikov V. V., Kozlov S. M., Oleinik O. A. Usrednenie differencial’nyh operatorov [Homogenization of differential operators]. Moscow: Fizmatlit, 1993 (In Russian).
     
  26. Piatnitski A. L., Chechkin G. A., Shamaev A. S. Homogenization: Methods and Applications. AMS, 2007.
     
  27. Ponte Castaneda P., Willis J. R. The effect of spatial distribution on the effective behavior of composite materials and cracked media. J. Mech Phys Solids, 1995, Vol. 43, pp. 1919–1951.
     
  28. Mori T., Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall, 1973, Vol. 21, pp. 571–574.
     
  29. Fedotov A. The hybrid homogenization model of elastic anisotropic porous materials. J. Mater. Sci., 2018, Vol. 53, pp. 5092–5102.
     
  30. Shvarc L. Matematicheskie metody dlya fizicheskih nauk [Mathematical methods for the physical sciences]. M.: Mir, 1965 (in Russian).
     
  31. Mishin A. V. Obobshchyonnaya proizvodnaya i eyo ispol’zovanie dlya analiza mikrostruktury geterogennoj sredy [Generalized derivative and its use for analyzing the microstructure of a heterogeneous medium]. Sib. Zhurn. Indust. Mat., 2021, Vol. 24, No. 4, pp. 79–96 (in Russian); DOI: 10.33048/SIBJIM.2021.24.406
     
  32. Bogolyubov A. N., Levashova N. T., Mogilevskij I. E., Muhartova Yu. V., Shapkina N. E. Funkciya Grina operatora Laplasa [Green’s function of the Laplace operator]. Moskva: MGU Publ., 2018 (in Russian).
     
  33. Khoroshun L. P. Random functions theory in problems on the macroscopic characteristics of microinhomogeneous media. Appl. Mechanics, 1978, Vol. 14, pp. 3–17.